In Stock
Tiger Stakes 24 inch × 1 inch — the full 26mm Tiger shaft in a short length for firm or shallow ground
Tiger Stakes 24″ × 1″
A 1″ (26mm) shaft in a shorter 24″ length. The full Tiger diameter for solid holding, but in a length suited to firmer or shallower ground where a 30″ is more depth than you can drive — or where you want the 26mm shaft's strength without full embedment. For pole marquees, frame tents and secondary clearspan positions. In soft or loose ground the 30″ or 36″ will seat deeper and hold better.
High alloy steel with Hogan’s patented heat-drawn point — the same manufacturing standard as the rest of the range, made to specification since 1948. It drives straight in hard ground where standard mild steel stakes bend. For the operational case for switching, see Why Professional Hire Companies Choose Hogan Stakes.
- Patented heat drawn point — stays straight in hard ground
- High alloy steel construction
- Mill finish — no coating to chip or corrode
- Consistent tip geometry, season after season
Manufactured by Hogan Tent Stakes (USA) — exclusively distributed in the UK by Milestone Events (Yorkshire) Ltd, Leeds. Initial stock of this size is limited — get in touch to confirm availability for your order. Minimum stake specifications for professional installations are set out in the MUTA Best Practice Guide.
Get in Touch Request QuoteProduct Details
| Size (Imperial) | 24″ × 1″ |
| Size (Metric) | 610mm × 26mm |
| Material | High alloy steel |
| Finish | Mill finish |
| Point | Patented heat drawn point |
| EN 14960 | Exceeds EN 14960 — 26mm × 610mm vs the 16mm × 380mm minimum |
| Weight | Available on request |
| Pricing | Contact us for pricing |
| Availability | In Stock |
Initial stock of this size is limited. Get in touch and we'll confirm availability and pricing for your quantities promptly.
Common Questions
Are Hogan Tiger Stakes suitable for hard ground?
Yes. Tiger Stakes are specifically designed for hard, compacted, and rocky ground conditions common across the UK. The patented heat-drawn point and high alloy steel construction maintain tip geometry under hard driving, where standard mild steel stakes bend or deform. See our hard ground anchoring guide for more detail.
How do I know which stake size I need?
Stake size depends on your structure type, ground conditions and load. The 18″ × 5/8″ is the lightest, for inflatables and light pole-tent positions; the 24″–36″ on the 1″ shaft covers most pole and frame marquee work; the 42″, 48″ and 60″ are for clearspan, heavy loads, soft ground and specialist anchoring. See the stake selection guide or use the stake calculator.
What is the minimum order quantity?
Tiger Stakes are sold individually — there is no minimum order. You can order as few as you need for a specific job or to top up your fleet. Trade buyers placing regular orders can discuss volume pricing with us directly — get in touch and we can talk through what that looks like for your operation and order frequency.
What is the 24″ × 1″ Tiger Stake best for?
The 24″ × 1″ (610mm × 26mm) gives the full 26mm Tiger shaft in a shorter length. It suits firm or shallow ground where a 30″ is more depth than you can drive, and lighter pole marquee and frame tent positions. In soft or loose ground, the 30″ or 36″ will seat deeper for more holding power.
Does the 24″ × 1″ Tiger Stake meet EN 14960?
Yes. The 24″ × 1″ Tiger Stake (26mm × 610mm) exceeds the EN 14960 minimum anchor dimensions of 16mm diameter and 380mm length on both counts. It is a comfortable choice for inflatable hire operators needing to demonstrate compliance at PIPA inspection. Confirm holding with a pre-event pull test. See our staking guide for inflatable hire operators.
Supplied to marquee hire companies, structure manufacturers and event production teams. Trade pricing by enquiry.
or get a direct quote ↓Interested in Tiger Stakes 24″ × 1″?
Fill in your details and we'll come back to you promptly with pricing and availability information.
What Happens Next
- We'll confirm receipt of your enquiry within 24 hours
- We'll come back with pricing based on your quantities
- We can discuss supply chain arrangements if relevant
- No obligation — just a straight conversation
Other Tiger Stake Sizes
In Stock
In Stock
In Stock
In Stock
In StockTools for the Full Job
Pull testing tells you what the ground is providing before you commit the installation. The extraction tool brings them out clean at de-rig — and gives you a load reading at every position on the way out.
Pull Test Indicator
Measures actual ground holding force in kilograms. Digital display, wireless HOLD remote, CE marked. Confirms the anchorage arrangement is sufficient before the structure goes under load.
Heavy-Duty Stake Extraction Tool
Rack-and-pinion mechanism — axial force, no levering, no bending. Compatible with Tiger Stakes 1″ and 1.125″. Each extraction stroke gives you a load reading when used inline with the pull test indicator.