In Stock
Hogan hook stake 24” × 5/8” — high alloy steel hook peg with a one-piece forged hook
Hook Stake 24” × 5/8”
The deepest hook in the range. The full 24 inches of the 5/8-inch shaft is for soft, loose or made ground, and for higher guy-line loads where holding power is the constraint. It also exceeds the EN 14960 minimum anchor dimensions.
High alloy steel with Hogan's patented heat-drawn point and a hook forged in one piece with the shaft — so the guy rope, skirt line or strap clips straight on, with no separate shackle to fit or lose. That is uncommon in a market of mild-steel galvanised hook pegs that bend or open up under load. See Why Professional Hire Companies Choose Hogan Stakes.
- Forged in one piece with the shaft — doesn't open up the way bent-wire hooks do
- Patented heat drawn point — drives straight in hard ground
- High alloy steel — not commodity mild steel
- Direct guy-rope / skirt attachment — no separate shackle
Manufactured by Hogan Tent Stakes (USA) — exclusively distributed in the UK by Milestone Events (Yorkshire) Ltd, Leeds. Initial stock of the hook range is limited — get in touch to confirm availability for your order.
Get in Touch Request QuoteSupplied to marquee hire companies, structure manufacturers and event production teams. Trade pricing by enquiry.
Product Details
| Size (Imperial) | 24” × 5/8” |
| Size (Metric) | 610mm × 16mm |
| Top fitting | One-piece forged hook |
| Material | High alloy steel |
| Finish | Mill finish |
| Point | Patented heat drawn point |
| EN 14960 | Meets/exceeds 16mm × 380mm minimum anchor dimensions |
| Pricing | Contact us for trade pricing |
| Availability | In Stock |
Initial stock is limited. Get in touch and we'll confirm availability and pricing for your quantities promptly.
Common Questions
What is the 24” × 5/8” hook stake best for?
The deepest hook in the range. The full 24 inches of the 5/8-inch shaft is for soft, loose or made ground, and for higher guy-line loads where holding power is the constraint. It also exceeds the EN 14960 minimum anchor dimensions.
Does the 24” × 5/8” hook stake meet EN 14960?
Yes. EN 14960 sets a minimum anchor of 16mm diameter and 380mm length. This hook stake is 16mm diameter and 610mm long, so it meets and exceeds both. See our EN 14960 staking guide.
When would I need something more than the 24” × 5/8” hook stake?
When the position needs more holding than a hook stake's 16mm shaft can give — very high-load primary anchors are better served by a full Tiger Stake on the 26mm or 29mm shaft, sized to the load. For guy-rope, skirt and strap attachment points within the hook stake's shaft range, the 24” is the deepest and highest-holding size available.
Interested in the 24” × 5/8” Hook Stake?
Fill in your details and we'll come back to you promptly with pricing and availability information.
What Happens Next
- We'll confirm receipt of your enquiry within 24 hours
- We'll come back with pricing based on your quantities
- We can discuss supply chain arrangements if relevant
- No obligation — just a straight conversation
Stakes & Anchoring
In Stock
In Stock
In Stock
In Stock